vsftpd-1.1.3配制实例之一：INTERNET_SITE(转)[@more@]

　　This example shows how you might set up a (possibly large) internet facing

　　FTP site.

　　The emphasis will be on security and performance.

　　We will see how by integrating vsftpd with xinetd, we get a powerful

　　combination.

　　Step 1) Set up your xinetd configuration file.

　　An example xinetd configuration file "vsftpd.xinetd" is supplied.

　　To install it:

　　cp vsftpd.xinetd /etc/xinetd.d/vsftpd

　　Let's look at the important content in this file and see what it does:

　　disable = no

　　socket_type = stream

　　wait = no

　　This says that the service is active, and it is using standard TCP sockets.

　　user = root

　　server = /usr/local/sbin/vsftpd

　　The server program /usr/local/sbin/vsftpd is used to handle incoming FTP

　　requests, and the program is started as root (vsftpd will of course quickly

　　drop as much privilege as possible). NOTE! Make sure that you have the vsftpd

　　binary installed in /usr/local/sbin (or change the file path in the xinetd

　　file).

　　per_source = 5

　　instances = 200

　　For security, the maximum allowed connections from a single IP address is 5.

　　The total maximum concurrent connections is 200.

　　no_access = 192.168.1.3

　　As an example of how to ban certain sites from connecting, 192.168.1.3 will

　　be denied access.

　　banner_fail = /etc/vsftpd.busy_banner

　　This is the file to display to users if the connection is refused for whatever

　　reason (too many users, IP banned).

　　Example of how to populate it:

　　echo "421 Server busy, please try later." > /etc/vsftpd.busy_banner

　　log_on_success += PID HOST DURATION

　　log_on_failure += HOST

　　This will log the IP address of all connection attempts - successful or not,

　　along with the time. If an FTP server is launched for the connection, it's

　　process ID and usage duration will be logged too. If you are using RedHat

　　like me, this log information will appear in /var/log/secure.

　　Step 2) Set up your vsftpd configuration file.

　　An example file is supplied. Install it like this:

　　cp vsftpd.conf /etc

　　Let's example the contents of the file:

　　# Access rights

　　anonymous_enable=YES

　　local_enable=NO

　　write_enable=NO

　　anon_upload_enable=NO

　　anon_mkdir_write_enable=NO

　　anon_other_write_enable=NO

　　This makes sure the FTP server is in anonymous-only mode and that all write

　　and upload permissions are disabled. Note that most of these settings are

　　the same as the default values anyway - but where security is concerned, it

　　is good to be clear.

　　# Security

　　anon_world_readable_only=YES

　　connect_from_port_20=YES

　　hide_ids=YES

　　pasv_min_port=50000

　　pasv_max_port=60000

　　These settings, in order

　　- Make sure only world-readable files and directories are served.

　　- Originates FTP port connections from a secure port - so users on the FTP

　　server cannot try and fake file content.

　　- Hide the FTP server user IDs and just display "ftp" in directory listings.

　　This is also a performance boost.

　　- Set a 50000-60000 port range for passive connections - may enable easier

　　firewall setup!

　　# Features

　　xferlog_enable=YES

　　ls_recurse_enable=NO

　　ascii_download_enable=NO

　　async_abor_enable=YES

　　In order,

　　- Enables recording of transfer stats to /var/log/vsftpd.log

　　- Disables "ls -R", to prevent it being used as a DoS attack. Note - sites

　　wanting to be copied via the "mirror" program might need to enable this.

　　- Disables downloading in ASCII mode, to prevent it being used as a DoS

　　attack (ASCII downloads are CPU heavy).

　　- Enables older FTP clients to cancel in-progress transfers.

　　# Performance

　　one_process_model=YES

　　idle_session_timeout=120

　　data_connection_timeout=300

　　accept_timeout=60

　　connect_timeout=60

　　anon_max_rate=50000

　　In order,

　　- Activates a faster "one process per connection" model. Note! To maintain

　　security, this feature is only available on systems with capabilities - e.g.

　　Linux kernel 2.4.

　　- Boots off idle users after 2 minutes.

　　- Boots off idle downloads after 5 minutes.

　　- Boots off hung passive connects after 1 minute.

　　- Boots off hung active connects after 1 minute.

　　- Limits a single client to ~50kbytes / sec download speed.

　　Step 3) Restart xinetd.

　　(on RedHat)

　　/etc/rc.d/init.d/xinetd restart

　　If you run into problems, check:

　　1) Your /etc/xinetd.d directory only has one FTP service.

　　vsftpd.conf

　　# Access rights

　　anonymous_enable=YES

　　local_enable=NO

　　write_enable=NO

　　anon_upload_enable=NO

　　anon_mkdir_write_enable=NO

　　anon_other_write_enable=NO

　　# Security

　　anon_world_readable_only=YES

　　connect_from_port_20=YES

　　hide_ids=YES

　　pasv_min_port=50000

　　pasv_max_port=60000

　　# Features

　　xferlog_enable=YES

　　ls_recurse_enable=NO

　　ascii_download_enable=NO

　　async_abor_enable=YES

　　# Performance

　　one_process_model=YES

　　idle_session_timeout=120

　　data_connection_timeout=300

　　accept_timeout=60

　　connect_timeout=60

　　anon_max_rate=50000

　　vsftpd.xinetd

　　# vsftpd is the secure FTP server.

　　service ftp

　　{

　　disable = no

　　socket_type = stream

　　wait = no

　　user = root

　　server = /usr/local/sbin/vsftpd

　　per_source = 5

　　instances = 200

　　no_access = 192.168.1.3

　　banner_fail = /etc/vsftpd.busy_banner

　　log_on_success += PID HOST DURATION

　　log_on_failure += HOST

　　}

　　

　　

转载于:http://blog.itpub.net/8225414/viewspace-957031/